Microtek Take-it MV320, Быстрый старт

Страница: 7 / 20

7
3. Inserting the SD Card*
A Secure Digital (SD) card can be used to increase the
DV camera’s memory capacity. When a card is installed,
images and video/audio clips are stored directly onto the
SD card. If a card is not installed, image and video/audio
clips are stored in the DV camera’s internal memory.
To install an SD card:
4. Turning the DV camera On/Off
Press the POWER button to turn the DV camera on.
When the DV camera is turned on, the green Mode
indicators start blinking and will stay on steady in the
Video mode, and the LCD screen is activated as well.
To turn off the DV camera, press the POWER button
again. When the DV camera is turned off, the LCD
screen is turned off as well.
1. Ensure that the DV camera is
turned off, then open the SD
card cover.
2. Insert and push the SD card
into the compartment until
you hear a “click”.
Ensure that the orientation of
the SD card matches the SD
card marking in the SD
compartment.
3. Close the SD card
compartment cover securely.
Using the Flash
The flash allows you to take pictures
in environments with insufficient
lighting. It works only in Photo mode.
Press the Flash ( ) button until the
desired flash mode appears on the
LCD screen, then press the Shutter button to shoot. The
available flash modes include Auto ( ), Auto with Red-
eye reduction ( ), Forced flash ( ), Forced flash with
Red-eye reduction ( ), and Flash off ( ).
NOTE: The flash is designed to fire twice in order to detect
correct shooting distance of the subject. When you press
the Shutter button with the flash enabled, you will see the
flash fire twice and hear a sound to indicate that a still
image has been taken (unless the sound is disabled).
Video Indicator
Power button
* SD card is optional and is not included with your purchase.