Microsemi Proprietary and Confidential. LX3301A/LX3302A Auto Calibration User Guide Revision 1.0
16
4.5
Auto Calibration of Phase
The following steps and image describe how to auto calibrate phase.
1. Uncheck the box for
and check the box for
.
linear Cal
phase Cal
2. Press
. Then, the new values of SSIN, SCOS, and GMTCH should appear.
Auto Calibration
3. Burn this into the IC by
.
write Eeprom to chip
Figure 27 • Auto Calibration of Phase
5. Click
to open the manual calibration
Run Simulation And Open Manual Calibration Environment
environment, shown in the following image.
Figure 28 • Manual Calibration Environment
6. Check the box for
to get the MaxErr number that IPCE can achieve. Select
to
SIM_OUT_ERROR
Zoom
