Microsemi Proprietary and Confidential. LX3301A/LX3302A Auto Calibration User Guide Revision 1.0
13
4
Calibration Using IPCE
The following section describes calibration using IPCE.
4.1
Loading Data/EEPROM into IPCE
1. In the IPCE GUI, click
, as shown.
Load Bench Data From File
Figure 20 • Load Bench Data From File
2. Select the data file captured and prepared as given data format (Excel).
3. When the following window appears, click
.
OK
Figure 21 • Success Window
3. Click
, as shown.
Load EEProm Data From File
Figure 22 • Load EEProm Data From File
4. Select
or click
. Finally, data and EEPROM parameters are
eeprom data stored
Read eeprom from chip
loaded into IPCE to do autocal and simulation.
