Microscan Quadrus MINI, Руководство пользователя, Страница: 76 / 424

3-32
Quadrus MINI Imager User’s Manual
ASCII Character Entry Modifier
ASCII Character Entry Modifier
Commands that require ASCII text fields, such as Preamble and Postamble commands,
can be sent to the imager as hex pairs (see Appendix F,
ASCII Table , for conversions).
To enter ASCII fields as hex values (00 to FF), add a lower-case h directly after the command’s
K number, and then enter the hex value that corresponds with the desired ASCII character.
Example:
Consider the Postamble command:
Imagine that your application requires the ASCII character > to be the postamble in your
symbol decode output.
The ASCII characters < , > , and
,
can only be entered as hex pairs. So, to make > the
postamble in your symbol decode output, enter the Postamble command as follows:
<K142h,,3E>
Note that the “status” field contains only a
,
. This is because the only field that is being
changed is the “postamble character(s)” field. (See Serial Configuration Command
Conventions on page A-13 for a more detailed explanation of this command shortcut.)
Serial Cmd Format:
< Knnnh,00-FF >
Serial Cmd:
< K142,
status,
postamble character(s) >