manualshive.com logo in svg

Microscan Quadrus MINI, Руководство пользователя, Страница: 332 / 424

Поделиться
Скачать
Microscan Quadrus MINI Скачать руководство пользователя страница 332

13-8

Quadrus MINI Imager User’s Manual

Differences from Default

Differences from Default

Clicking the Differences from Default button will cause ESP to check all stored configuration 
settings and compare them to default settings. All settings that are different than default 
will appear in the left column (shown below), and descriptions of those settings will appear 
in the right column.

• To create a symbol containing any of the command settings in the table, click Generate 

Barcode. This will bring up the Bar Code Dialog.

• To save the Differences from Default report, either as plain text or as a tab-delimited 

text file, click Save As.

• Click Send and Save to send the settings to the imager and save them, or Send to 

Reader to send the settings without saving them. 

Important: The use the Differences from Default feature, you must connect to the 
imager and Receive Reader Settings via the Send/Recv button on the toolbar.

Click this button for a list of ESP 
configuration settings that are 
different than default settings.

Click Generate Barcode to bring up the Bar Code 
Dialog. Then create configuration symbols containing 
the configuration commands of your choice.

Click Save As to save the 
report as plain text or a 
tab-delimited text file.

Send configuration settings 
to the imager without saving 
by clicking Send to Reader.

Send configuration settings to the 
imager and save in ESP by clicking 
Send and Save.

Содержание Quadrus MINI









































































































































































































































































































































































































































Отзывы:

Нет отзывов