manualshive.com logo in svg

Microscan Quadrus MINI, Руководство пользователя, Страница: 68 / 424

Поделиться
Скачать
Microscan Quadrus MINI Скачать руководство пользователя страница 68

3-24

Quadrus MINI Imager User’s Manual

USB HID Interface

Report Options

The following functionality conditions hold true regardless of how HID Reports are configured:

1. The host application must establish a connection with the imager to receive Microscan 

HID IN Reports (symbol data) and to send Microscan HID OUT Reports (commands, 
serial triggers). 

2. The imager can always receive Microscan HID OUT Reports (commands, serial triggers). 

3. The host application can always send commands through Microscan HID OUT 

Reports. If the command requires a response (a part number, for example), the 
imager will always send the response through Microscan HID IN Reports.

4. The imager always ignores Keyboard OUT Reports sent by the host operating system.

5. The content of both the Keyboard Reports and Microscan HID IN Reports is identical, 

except for Keyboard Reports non-printable data limitations.

Microscan HID IN Reports

HID Reports are used as a channel for standard Microscan imager communication, 
command input, and symbol data output. There are two types of Microscan HID 
Reports:

Note: The imager is always able to receive commands and serial triggers from the host 
through Microscan HID OUT Reports, regardless of the Microscan HID IN Report status. 
If the imager receives a command that requests a response, such as a part number query, 
the imager will send a Microscan HID IN Report regardless of the IN Report status. 

Microscan HID IN Reports Enabled

When this feature is enabled, the imager will send Microscan HID IN Reports to the host, 
containing data originated by the imager.

Microscan HID IN Reports Disabled

When this feature is disabled, the imager will 

not

 send Microscan HID IN Reports to the 

host, containing data originated by the imager. 

Report Type

Data Content

Microscan HID IN (imager to host)

Symbol data; No Reads; Service messages

Microscan HID OUT (host to imager)

Commands; serial triggers

Serial Cmd:

<

K149,Microscan HID IN Report status

,Keyboard IN Report status

>

Default:

1

Options:

0 = Disabled

1 = Enabled

Содержание Quadrus MINI









































































































































































































































































































































































































































Отзывы:

Нет отзывов