Microscan MS-4Xi Скачать руководство пользователя страница 68

Страница: 68 / 360

4-4

MS-4Xi Imager User’s Manual

Calibration Options

Disabled (Shutter Speed)

When this feature is disabled, the shutter speed is fixed and is not part of the calibration

process.

Enabled (Shutter Speed)

When this feature is enabled, shutter speed will be calibrated to provide the best possible

image quality and performance.

Fast Shutter

The calibration process will concentrate on achieving the fastest possible shutter setting that

will still provide good performance. The image quality or contrast may not be as good as

what would be achieved with the

Enabled

setting. The calibration process is not designed to

choose the fastest shutter speed that can decode a symbol, but rather to optimize for the

fastest shutter speed that still provides good image quality.

Содержание MS-4Xi









































































































































































































































































































































































Результаты поиска

Содержание MS-4Xi

Отзывы:

Microscan MS-4Xi, Руководство пользователя, Страница: 68 / 360

Результаты поиска

Содержание MS-4Xi

Отзывы: