Microscan MS-4Xi Скачать руководство пользователя страница 123

Страница: 123 / 360

MS-4Xi Imager User’s Manual

6-13

Symbologies

EAN 128 Status (Code 128)

Output Format

(Code 128)

Application Record Separator Status

(Code 128)

Definition:

When this field is disabled, the imager will not check any Code 128 labels

for conformance to EAN requirements, or perform any special formatting.
When enabled, the imager can read symbols with or without a function 1

character in the first position. If a symbol has a function 1 character in the

first position, it must conform to EAN format. Symbols that conform to EAN

format will also be subject to the special output formatting options available

in this command.

Note:

Code 128 status must be enabled for EAN status to be active.

If EAN status is required, the imager will only decode symbols that have a

function 1 character in the first position and that conform to EAN format. All

symbols read will be subject to the special output formatting options available

in this command.

Note:

Code 128 status must be enabled for EAN status to be active.

Serial Cmd:

K474,

status,fixed symbol length status,fixed symbol length,

EAN 128 status

output format,application record separator status,application record separator

character,application record brackets,application record padding

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

2 = Required

Definition:

Standard

, the imager will not apply special EAN output formatting

options.
In

Application

, the imager will apply the special EAN output formatting

options to decoded EAN-conforming symbols.

Serial Cmd:

K474,

status,fixed symbol length status,fixed symbol length,EAN 128 status,

output format

,application record separator status,application record separator

character,application record brackets,application record padding

Default:

Standard

Options:

0 = Standard

1 = Application

Definition:

When enabled, an EAN separator will be inserted into the output between

fields whenever an EAN-conforming symbol is decoded and EAN output

formatting applies.

Serial Cmd:

K474,

status,fixed symbol length status,fixed symbol length,EAN 128 status,

output format,

application record separator status

,application record separator

character,application record brackets,application record padding

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Содержание MS-4Xi









































































































































































































































































































































































Результаты поиска

Содержание MS-4Xi

Отзывы:

Microscan MS-4Xi, Руководство пользователя, Страница: 123 / 360

Результаты поиска

Содержание MS-4Xi

Отзывы: