Microscan MS-4Xi Скачать руководство пользователя страница 264

Страница: 264 / 360

11-8

MS-4Xi Imager User’s Manual

Configuration Database Status

Code 39 (Add 16)

If enabled, Code 39 will be active for this database index.

Codabar (Add 32)

If enabled, Codabar will be active for this database index.

Code 93 (Add 64)

If enabled, Code 93 will be active for this database index.

Interleaved 2 of 5 (Add 128)

If enabled, Interleaved 2 of 5 will be active for this database index.

UPC/EAN (Add 256)

If enabled, UPC/EAN will be active for this database index.

PDF417 (Add 512)

If enabled, PDF417 will be active for this database index.

MicroPDF417 (Add 1024)

If enabled, MicroPDF417 will be active for this database index.

BC412 (Add 2048)

If enabled, BC412 will be active for this database index.

Pharmacode (Add 4096)

If enabled, Pharmacode will be active for this database index.

DataBar-14 (RSS-14) (Add 8192)

If enabled, DataBar-14 will be active for this database index.

Important:

If the stacked and non-stacked operation is required, the DataBar-14 command

must be configured as follows:

<K482,2>

. If the DataBar-14 status parameter in the

<K482>

command is set to either DISABLED or ENABLED, the imager will only read

non-stacked DataBar-14 symbols.

DataBar Limited (RSS Limited) (Add 16384)

If enabled, DataBar Limited will be active for this database index.

DataBar Expanded (RSS Expanded) (Add 32768)

If enabled, DataBar Expanded will be active for this database index.

Important:

If the stacked and non-stacked operation is required, the DataBar Expanded

command must be configured as follows:

<K484,2>

. If the DataBar Expanded status parameter

in the

<K484>

command is set to either DISABLED or ENABLED, the imager will only

read non-stacked DataBar Expanded symbols.

Содержание MS-4Xi









































































































































































































































































































































































Результаты поиска

Содержание MS-4Xi

Отзывы:

Microscan MS-4Xi, Руководство пользователя, Страница: 264 / 360

Результаты поиска

Содержание MS-4Xi

Отзывы: