manualshive.com logo in svg

Microscan MS-4Xi, Руководство пользователя, Страница: 289 / 360

Поделиться
Скачать
Microscan MS-4Xi Скачать руководство пользователя страница 289

MS-4Xi Imager User’s Manual

13-9

Utilities

Differences from Default

Clicking the 

Differences from Default

 button will cause 

ESP

 to check all stored configuration 

settings and compare them to default settings. All settings that are different than default 

will appear in the left column (shown below), and descriptions of those settings will appear 

in the right column.

• To create a symbol containing any of the command settings in the table, click 

Generate 

Barcode

.

• To save the 

Differences from Default

 report, either as plain text or as a tab-delimited 

text file, click 

Save As

.

• Click 

Send and Save

 to send the settings to the imager and save them, or 

Send to 

Reader

 to send the settings without saving them. 

Important:

 To use 

Differences from Default

, connect to the imager and 

Receive 

Reader Settings

 via the 

Send/Recv

 button on the toolbar.

Click the 

Utilities 

button and then the 

Differences 

tab to 

display the Differences from Default view.

Click this button for a list of 

ESP

 

configuration settings that are 

different than default settings.

Click 

Generate Barcode

 to display the 

Bar Code 

Dialog

. Then create configuration symbols containing 

the required configuration commands.

Send configuration settings to 

the imager without saving by 

clicking 

Send to Reader

.

Click 

Save As

 to save the 

report as plain text or a 

tab-delimited text file.

Send configuration settings to the 

imager and save in ESP by clicking 

Send and Save

.

Содержание MS-4Xi









































































































































































































































































































































































Отзывы:

Нет отзывов