Troubleshooting 133
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 50 A3 - 3
Edition 2.1
In case of paper jam you must clear all paper from the entire paper path.
The paper path is the route paper travels as it makes its way from the
selected paper source through the printer and into the selected output
bin. To clear the paper in the path, start at the paper source the printer is
using for the current job. Open all doors and covers between the source
and the selected output bin. If you are not sure which source the printer is
using, start with cassette 4, if installed; otherwise, start with cassette 2.
See the following illustrations for a better understanding of the path the
paper travels through the printer and its options.
Fig. 7.4.2.a SOLID 50 A3 - 3 schematic paper path of standard cassettes and
optional cassettes, duplex unit, and multipurpose feeder
You can use the message map on the front of the printer to locate the
doors, covers, and options you must open or remove to clear the paper
path.
