108 Panel Functions
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID 50 A3 - 3
Edition 2.1
5.28. Number of Characters per Inch Setting (Character Spacing)
This function sets the number of characters per inch. This setting is
effective only in case of using a line printer emulation.
With a small number of characters per inch, character spacing will be
relatively large. (Ref. IDOL Programming Manual).
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1
]
[Page Menu
]
[Font Number
]
[Char. Spacing
]
[Digit4 013.3
]
[Digit1 012.0 ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
Press the NEXT or PREVIOUS key until
[Page Menu ] is displayed.
Press the NEXT or PREVIOUS key until
[Char. Spacing ] is displayed.
13.3 cpi = currently set value.
(
c
haracters
p
er
i
nch).
Pressing the NEXT or PREVIOUS key
changes the value of the current digit
(Digit 4 = left position, in this example:
0. Pressing the SELECT key moves you
to the next digit (the RETURN key
moves you back, if need be).
The number of characters per inch
was reduced to 12 cpi.
In addition this new value can be
saved as setup value (using the SELECT
key), before the printer is turned ON
LINE again.
