Handling of Consumables
33
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex
logiJET TC8
Edition 1.2
Fig. 5.1.1.g Roughly adjusting the paper guides to the new paper width
8.
Loosen the 2 fastening screws of the rear paper guide and
adjust this paper guide to a width larger than the future paper
width and for a centered paper transport (using the scales).
9.
Place the continuous media (box containing the fanfold
paper, e.g.) on level ground behind the printer.
10.
Please carefully align the stack of fanfold paper to the
transport of the media into the printer.
Please note:
The stack not only has to be aligned to the middle of the
In addition the stack has to be aligned
in square to the paper feed direction. This is necessary to
avoid folds and to secure the paper is running straight!
11.
Take the free end of your continuous media (z-folded
paper, e.g.) and move it through the paper input opening
into the printer.
12.
Route the free end of the media along the paper path (see
always in a centrically
way) out to the front of the printer. Finally the media has to
jut out over the platen roller of the front print unit.
Fastening screw
front
paper guide
(centered)
Scale
Fastening screw
Scale
Fastening screw
rear
paper guide
(separately
adjustable)
Fastening screw
