PPS-60
Precision Positioner Stage
Rev: 1.04
MICRONIX USA,LLC
Irvine, California
www.micronixsusa.com
12
Reference Manual
5.
Connecting the PPS-60
5.1
Atmospheric Environments
For controller information refer to the appropriate MMC controller manual.
Wiring diagrams are consistent for all piezo, stepper, and linear motor assemblies.
5.1.1
Open Loop Installation & Wiring Diagram
Connecting the PPS-60 in an open loop configuration only requires that the D-
sub 9 Pin Motor Cable be connected to a compatible controller. No other
cables or components are required. Please note, open loop configurations are
only available for stepper or piezo motor versions (See Appendix A.1 or A.3 for
pinout configurations).
External Version
Internal Piezo and Stepper Versions