PPS-60
Precision Positioner Stage
Rev: 1.04
MICRONIX USA,LLC
Irvine, California
www.micronixsusa.com
11
Reference Manual
4.1.2
X-Y Mounting
For additional mounting configurations see Section 7: Stacking Configurations.
Note that the 25mm version has to be factory mounted. (Additionally, please
note that it is possible to move the carriage of the linear and piezo motor
configurations manually without damaging the stage, however, for stepper
versions the motor must be driven by a controller to reposition the carriage.)
For internal motor configurations: Mounting screws must be flush with base
surface.
Direction
of Travel
Requires:
2 x M2 x 6mm Dowel Pins
4 x M3 Socket Head Cap Screws
(Low Profile recommended)
Move carriage via the
controller*, if necessary, to
access mounting holes.