Micronics Portaflow 222, Руководство пользователя

Страница: 27 / 57

Micronics Portaflow 222 & 333 User Manual
Issue 3.1 Feb 20 Page 23
View/Edit Sit DD-MM-YY HH:MM:SS
->Choose from list of sites..
Add new site..
Site name.. QuickStart
Pipe outside diameter 114.30 mm
Pipe circumference 359.08 mm
Pipe wall material Plastic
Pipe wall thickness 8.00 mm
Lining material None
Pipe lining thickness 0.0 mm
Sensor set A-ST
Sensor mode Reflex
Fluid type Water
Fluid temperature 14.0 °C
Cutoff Velocity 0.010 m/sec
Roughness factor 0.0150 mm
Zero Flow Velocity -0.0140 m/sec
Zero Flow Offset -5.1437 l/min
Calibration factor 1.000
RTD Settings..
Read flow using selected sensor..
Read flow using recommended sensor..
Delete this site..
Exit
PF333HAB MAIN DD-MM-YY HH:MM:SS
Quick start..
->View / Edit Site Data..
Setup Instrument..
Data Logger..
Read Flow..
Read Energy..
4 MANAGING NAMED SITES
Setting up the Portaflow system using the Quick Start method described in the previous chapter is
the recommended method to use in a ‘one
-
off’ situation.
If you have several site locations that you want to monitor on a frequent basis it is better to set up a
named ‘Site’ to store the installation
details, such as pipe dimensions and material, required to set-
up the Portaflow system. These can then be recalled later when revisiting a particular location.
4.1 View/Edit Site Data
Use the View/Edit Site Data command on the MAIN
Menu to display the View/Edit Site menu. This allows
you to:

Manage site names.
The instrument can store up to 20 sites, the first
site is reserved for the default
QuickStart site
and cannot be renamed; subsequent sites are
initially named
Site01 through to Site19 .

Edit key parameters such as pipe outside
diameter and wall thickness.

Change calibration factors including Cutoff
Velocity and Roughness Factor.