Micronics Portaflow 222, Руководство пользователя

Страница: 17 / 57

Micronics Portaflow 222 & 333 User Manual
Issue 3.1 Feb 20 Page 13
2.3 Connecting Temperature Probes (Portaflow 333 only)
The temperature sensors must be located at the input and output of the system that is being
monitored. The area of pipe where they are to be attached must be free of grease and any
insulating material. It is recommended that any coating on the pipe is removed so that the sensor
has the best possible thermal contact with the pipe.
Figure 11 Portaflow 333 Temperature Probe Positioning
The sockets on the Electronics Module are marked Red (Hot) and Blue (Cold) - see Error!
Reference source not found. . This defines the location of the temperature sensors on installations
where heat is being extracted from the system.