45
The trigger open up until Max Activity Interval expires.
Enable Session Chaining (UDP)
Session chaining which is not needed for FTP but is needed for some
applications, like NetMeeting.
Binary Address Replacement / Address Translation Type
Some applications embed address and / or port information in the payload
of the packet. This function allows you to specify what type of address
replacement is set on a trigger. Incoming packets are searched in order to
find their embedded IP address. The address is then replaced by the
correct inside host IP address, and NAT translates the packets to the
correct destination.
Configure Intrusion Detection
Key in the detection requirement then click Apply box to enable this
function.
