MicroNet BroadLink SP3353 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 66

background image

3

CE Declaration of conformity

This equipment complies with the requirements relating to electromagnetic
compatibility, EN55022 class A for ITE, the essential protection requirement of
Council Directive 89/336/EEC on the approximation of the laws of the Member
States relating to electromagnetic compatibility.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limitations are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if no installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

??

Reorient or relocate the receiving antenna.

??

Increase the separation between the equipment and receiver.

??

Connect the equipment into a different outlet from that the receiver is

connected.

??

Consult your local distributors or an experienced radio/TV technician for help.

??

Shielded interface cables must be used in order to comply with emission limits.

Changes or modifies to the equipment, that are not approved by the party
responsible for compliance could affect the user’s authority to operate the
equipment.

Company has an on-going policy of upgrading its products and it may be possible
that information in this document is not up-to-date. Please check with your local
distributors for the latest information. No part of this document can be copied or
reproduced in any form without written consent from the company.

Trademarks:
All trade names and trademarks are the properties of their respective companies.

Copyright

c

2002 All Rights Reserved.

«
1
2
3
4
5
...
»

Содержание BroadLink SP3353



































































Отзывы:

Нет отзывов

Похожие инструкции для BroadLink SP3353

Бренд: National Instruments Страницы: 162

S5120V3-EI Series

Бренд: H3C Страницы: 54

Бренд: H3C Страницы: 116

Бренд: Paradyne Страницы: 112

Бренд: Cambium Networks Страницы: 215

Ethernet Communication Module DVPEN01-SL

Бренд: Delta Electronics Страницы: 54

Бренд: Funkwerk Страницы: 2

Бренд: TRENDnet Страницы: 2

DM/IP601-CPCI-100BT

Бренд: Dialogic Страницы: 2

Бренд: Edgewater Networks Страницы: 7

Бренд: Infoblox Страницы: 13

Wisenet XRN-6410RB2-24TB

Бренд: Hanwha Techwin Страницы: 124

Бренд: Abocom Страницы: 1

Бренд: ADTRAN Страницы: 161

Бренд: Idis Страницы: 16

Бренд: Netopia Страницы: 138

TEG-S16R - DATA SHEETS

Бренд: TRENDnet Страницы: 12

Бренд: Proxim Страницы: 65

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды