22
Dynamically assigned:
-
Select the “IP Address” tab and select “Obtain an IP address automatically” (default
setting)
-
Select the “Gateway” tab and click “Remove” to clear any existing entry of gateway IP
address
-
Select the “DNS Configuration” tab and click “Disable DNS”
-
Click “OK” button
Fixed:
If there are some clients who need to get fixed IP addresses for some reasons and the
nodes also need to access Internet through the ADSL Router then the following steps
used to configure system
-
Select “Specify an IP address” in the IP Address tab of the TCP/IP Properties window
and enter 192.168.1.x in the IP Address field (the “x” is a number between 2 and 254
used by the ADSL Router to identify individual computers)
-
Select the “DNS Configuration” tab and click “Enable DNS”
-
Enter the DNS IP Address obtained from your ISP in the “Server Search Order” location.
Click “OK” button.
NOTE: 0. The default IP address of ADSL Router is 192.168.1.1 and subnet mask is
255.255.255.0.
1. For the new network computers to use dynamic IP addresses provided by the
ADSL Router DHCP server, they should not use the range of fixed IP
addresses. For example, the fixed IP addresses already use 192.168.1.2 to
192.168.1.68 the DHCP server must be setup to allocate the dynamic
addresses out of this range.