Section
22
CASSETTE PROGRAM CONCATENATION
Cassette programs may be concatenated (joined together) as follows:-
1) Press PROG "ON".
2) Load the first program from cassette as normal.
3) Use only the LOAD button to enter and exit the cassette load operation.
**** DO NOT PRESS RESET ****
4) Press HOLD "ON" to hold the program in memory.
NOTE
If HOLD is not on, or if RESET has been pressed, then any further loading will completely
overwrite any program that was initially in the systems memory.
5) Load second (or third or fourth etc.) program using only the LOAD button to enter
and exit the cassette load operation.
ALTERNATE METHOD
1) Use SST or BST to get to a particular command in a program.
(remember that END is a command).
2) Press HOLD "ON" to hold the program in memory.
3) Load next program from cassette by only pressing the LOAD button.
The first command of the second program will overwrite the command which was reached
by SST or BST before the second program was loaded so you should SST to the END of
the first program before loading the second.
These operations may be repeated as many times as required within the memory constraints
of the system.
5
