Rotary Microtome HM 355 S
MICROM International GmbH
Robert-Bosch-Str. 49
D- 69190 Walldorf
386 200 - English
3-12-4 INSERT FOR ROUND SPECIMEN,
V-INSERT AND V-DISTANCE PIECE
To cut round specimens, the insert for round
specimens (fig. 57.A) with defined diameters of 6,
15 and 25 mm (special sizes on request) or the V-
insert (fig. 57.B) can be clamped into the standard
specimen clamp.
•
The pin (fig. 57.3), which fits into the lower
clamping jaws (fig. 56.1), positions the insert
precisely. The two springs (fig. 57.4) make it
easy to remove the specimen from the inserts
(fig. 57.1 and 57.2).
•
To fasten the V-distance piece (fig. 57.C) on
the fixed jaw (fig. 56.2) of the standard
specimen clamp, the clamping screw (fig.
56.3) must be unscrewed from the spindle.
Pull the spindle off the clamp.
•
After having inserted the V-distance piece,
insert the spindle again as well as the
clamping screw (fig. 56.3).
Fig. 57
