Microm HM 325 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 49

background image

Rotary Microtome HM 325

MICROM International GmbH
Robert-Bosch-Str. 49

D- 69190 Walldorf

387821 - English

HAZARD OF INFECTION

Use the appropriate safety and disinfection measures when working with infectious specimens.
According to the rules and regulations concerning the handling of infectious/radioactive contaminated
material of the respective laboratory, safety clothing (e.g. particle mask, gloves, protective shoe covers) must
be worn.
Specimens used during the intended operation of the instrument might potentially be infectious. For this
reason, it is recommended to observe the general laboratory regulations concerning protection against
danger of infection.
Information on decontamination media, their use, dilution and effective range of application can be read in
the Laboratory Biosafety Manual : 1984 of the World Health Organization.

WASTE DISPOSAL

All debris, waste as well as infectious and radioactive contaminated material from operation must be
disposed of in accordance with the respective regulations of the lab. Section waste must be disposed of
according to the respective regulations for special waste.

HAZARD OF MALFUNCTION

To avoid the hazard of malfunction of an instrument, it must only be operated in a controlled electromagnetic
environment. This means, that transmitters such as mobile phones must not be operated in their close
vicinity.
In case of malfunctions and/or service work, please turn off the instrument and contact your local dealer.

DANGER IN EXPLOSIVE ENVIRONMENT

The instrument must not be operated in the presence of flammable gases.

«
...
9
10
11
12
13
...
»

Содержание HM 325


















































Отзывы:

Нет отзывов

Похожие инструкции для HM 325

Бренд: Olympus Страницы: 86

Бренд: Camozzi Страницы: 2

Бренд: Ecco Страницы: 3

Бренд: VeEX Страницы: 2

Бренд: JB-Lighting Страницы: 48

Бренд: ACCU-CHECK Страницы: 104

Бренд: QBC Diagnostics Страницы: 65

Бренд: T-Rex Страницы: 13

Бренд: DB Industries Страницы: 60

Бренд: vc999 Страницы: 55

Бренд: Salsbury Industries Страницы: 4

Бренд: Unitary products group Страницы: 28

Бренд: JBL Страницы: 38

Бренд: JBSYSTEMS Light Страницы: 32

Бренд: JBM Страницы: 12

Бренд: PacBio Страницы: 13

Бренд: Pablo Страницы: 4

Бренд: PA Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды