19
If an error occurs during measurement, the
measurement is interrupted and an error message
«Err» is displayed.
•
Please contact your local
Microlife service center if the
error persists.
•
If you think the results are
unusual, please read through
the information in this
instruction manual carefully.
Error
Description
Potential cause and
remedy
«
Err 1
»
Signal too
weak
The pulse signals on
the cuff are too weak.
Re-position the cuff and
repeat the measurement.
«
Err 2
»
Error signal
During the measurement,
error signals were
detected by the cuff,
caused for instance by
movement or muscle
tension. Repeat the
measurement, keeping
your arm still.
Error messages
Содержание BP3AJ1-7A
Страница 1: ...Office blood pressure measurement device with Afib detection Instruction Manual EN 1 ...
Страница 2: ...1 ...