Microlife BP3AJ1-7A, Инструкция по эксплуатации

Страница: 21 / 26

EN
20
« HI » Pulse or cuff
pressure too
high The pressure in the cuff
is too high (over 300
mmHg) OR the pulse is
too high (over 200 beats
per minute). Relax for 5
minutes and repeat the
measurement.
« LO » Pulse too low The pulse is too low
(less than 40 beats per
minute). Repeat the
measurement.
« Err 3 » No pressure in
the cuff An adequate pressure
cannot be generated in
the cuff. A leak may have
occurred. Replace the
batteries if necessary.
Repeat the measurement.
« Err 5 » Abnormal
result The measuring signals
are inaccurate and no
result can therefore
be displayed. Read
through the checklist
for performing reliable
measurements and then
repeat the measurement.