9
Connect the cuff to the device
Connect the cuff to the device by inserting the cuff connector
into the cuff connector socket.
Fitting the cuff properly
1) Place the cuff over the left (right) upper arm so that the
air tube and artery mark arrow point towards the lower
arm.
2) Put the cuff around the arm. Make sure that the lower
edge of the cuff lies approximately 2 to 3cm ( ¾ to 1
inch) above the elbow.
2-3 cm
(3/4 to 1 inch)
Before using the device (cont.)
Содержание BP3AJ1-7A
Страница 1: ...Office blood pressure measurement device with Afib detection Instruction Manual EN 1 ...
Страница 2: ...1 ...