© Microhard
92
5.0 AT Command Line Interface
5.1.1 Telnet (TCP/IP)
Telnet can be used to access the AT Command interface of the pMDDL5824. The default port is TCP Port
23. A telnet session can be made to the unit using any Telnet application (Windows Telnet, Tera Term,
ProComm etc). Once communication is established, a login is required to continue.
Image 5
-
1: Establishing a Telnet Session
A session can be made to the WAN IP Address (if allowed in the firewall settings) for remote configuration,
or to the local RJ45 interface.
Once a session is established a login is required to continue. As seen in the Serial port setup, the default
login is
admin
, and the password is
admin.
Once verified, the AT Command Line Interface menu is shown
and AT Commands can now be issued. (Type
“?”
or Help to list the commands).
Image 5
-
2: Telnet AT Command Session
The factory default
network settings:
IP: 192.168.168.1
Subnet: 255.255.255.0
Gateway: 192.168.168.1
5.1 AT Command Overview
AT Commands can be issued to configure and manage the pMDDL5824, via TCP/IP (telnet).
Содержание pMDDL5824
