Microhard Systems pMDDL5824, Руководство по эксплуатации

Страница: 59 / 117

© Microhard 59
4.0 Configuration
Master - A Master may provide a wireless data connection
to many slaves/remotes.
Slave/Remote - A Salve may sustain one wireless connection,
i.e. to an Master.
Repeater - A Repeater may provide a wireless connection to
a Master/Repeater and many remotes.
Operation Mode
Values (selection)
Master
Slave
Repeater
Mesh
For video applications it is required to connect the video source (camera) to the radio designated as the
Master. Video receivers would then be connected to the Slave radios, this would allow for multiple viewing
stations. See the diagram below for an example.
M
S
Wireless
Ethernet
Ethernet
S Ethernet
Wireless
The Video source should always be connected
to the Master radio.
Diagram 4 - 3 - 2: Video Application
Mesh - In a Mesh network, all units need to be configured as a Mesh node . In this mode data
will find a path along the Mesh node until it reaches its destination. This is ideal for
ensuring data reaches its intended destination, and for providing redundancy, but
comes at the cost of overall throughput
Point to Point Network
Master/Slave
Point to Multipoint Network
Many Slaves
Point to Multipoint Network
Re Many Slaves
Mesh Network
Many Mesh Nodes
Master Master
Master
Slave Slaves
Slaves
Repeater
Mesh
Nodes
Diagram 4 - 3 - 1: Operating Modes
Mesh
Nodes