Microhard Systems pMDDL5824, Руководство по эксплуатации

Страница: 39 / 117

© Microhard 39
4.0 Configuration
4.1.3 System > Services
Certain services in the pMDDL5824 can be disabled or enabled for either security considerations or
resource/power considerations. The Enable/Disable options are applied after a reboot and will take affect
after each start up.
Image 4 - 1 - 4: System > Services
SSH
Using the SSH Service Enable/Disable function, you can disable the
SSH service (Port 22) from running on the pMDDL5824. The port used
by the SSH service can also be modified. The default is 22.
22
Values (port)
Telnet
Using the Telnet Service Enable/Disable function, you can disable the
Telnet service from running on the pMDDL5824. The port used by the
Telnet service can also be modified. The default is 23.
23
Values (port)
Web UI
The default web server port for the web based configuration tools used
in the modem is port 80 (http) and port 443 (HTTPS).
Change as required, but keep in mind that if a non standard port is
used, it must be specified in a internet browser to access the unit.
(example: http://192.168.168.1:8080).
Values
(selection)
HTTP/HTTPS
HTTP
HTTPS
FTP
The FTP service can be enabled/disabled using the Services Status
Menu. The FTP service is used for firmware recovery operations.
Enable / Disable
Values (port)