Microhard Systems pMDDL5824, Руководство по эксплуатации

Страница: 73 / 117

© Microhard 73
4.0 Configuration
Select operational status of the Serial Port. The port is in console
mode by default.
Port Status
Values (selection)
Data / Console
The serial baud rate is the rate at which the modem is to communicate
with the attached local asynchronous device.
Data Baud Rate
Values (bps)
Note: Most PCs do not
readily support serial
communications greater
than 115200bps.
230400
115200
57600
38400
28800
19200
14400
9600
7200
4800
3600
2400
1200
600
300
This setting determines the format of the data on the serial port.
The default is 8 data bits, No parity, and 1 Stop bit.
Data Format
Values (selection)
8N1
8E1
8O1
Enabling the escape sequence allows users to temporarily exit data
mode and enter console mode for the serial port.
Escape Sequence
Values (selection)
Enabled / Disabled
Appears only when the Escape Sequence is enabled. Enter the time
interval in which the escape sequence must be entered fully.
Escape Guard Interval
Values (seconds)
1
Only shown when the escape sequence is enabled. Enter the
characters to be used for the escape sequence.
Escape Sequence String
Values (characters)
+++
Selects the port mode of the data port, not available on the console
port (RS232 only).
Port Mode
Values (selection)
RS232
RS485 Full Duplex
RS485 Half Duplex