Microh ARENA COLOUR WASH, Руководство пользователя

Страница: 20 / 27

20
- Display intensity
With this function, you can adjust the display intensity from 20% to 100%. Use the [Up] and [Down] keys to select the level of the
display intensity and press [Enter] to confirm or [Mode] to cancel and return to the menu.
- Lamp off via DMX
This function allows you to switch off the lamp through the DMX controller. Use the [Up] and [Down] keys to select "On" if you want
to switch the lamp off by DMX or "Off" if you don’t want to switch the lamp off by DMX and press [Enter] to confirm or [Mode] to
cancel and return to the menu
.
- Temperature
Displays the internal temperature of the fixture in Celsius. Internal temperatures below 80° C are not critical. However, temperatures
greater than 80° C will lead to the lamp being switched off. Please note that the external temperature should not exceed 45° C.
- Fan speed operation
By using this function you can choose 4 types of fan speed operation. Browse through this menu by pressing the [Up] and [Down]
keys - the display shows step by step the following messages: "HIGH, reG, Lo.HI, Lo.OF". Press [Enter] if you wish to select one of
them or [Mode] to cancel and return to the menu.
- high speed of the fans
The cooling fans operate at high speed for maximum cooling efficiency.
- continuous controlling of the fan speed
The fan automatically increases its speed in order to control the internal temperature of the
fixture if the temperature increases above a certain level (the low fan speed reduces the cooling
of the fixture). This cycle can repeat several times until the internal temperature is at a suitable
level.
- low/high speed of the operating fan
The fan keeps the adjusted speed low until the internal temperature exceeds the maximum
allowable temperature of the fixture then the
ARENA COLOUR WASH automatically switches
the fan speed from low to high.
- low speed / switch off the operating lamp
The fan keeps the adjusted speed low until the internal temperature exceeds the maximum
allowable temperature of the fixture then the
ARENA COLOUR WASH automatically switches
off the lamp.
- Default settings
Press [Enter] to reset all of the fixture’s personalities (not the adjusting functions) to their default values. On
the display will appear “rSt” meaning that the fixture is resetting. See the table of personality settings and
their default positions.