Microh ARENA COLOUR WASH, Руководство пользователя

Страница: 11 / 27

11
Use only a stereo-shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with
the fixture and one fixture with another.
Configuration of the XLR connector:
If you are using the recommended
ARENA COLOUR WASH controllers, you can connect the DMX output of
the controller directly with the DMX input of the first fixture in the DMX chain. If you wish to connect the DMX
controller with other XLR outputs, you will need to use adapter cables.
Building a serial DMX chain:
Connect the DMX output of the first fixture in the DMX chain with the DMX input of the next fixture. Always
connect one output with the input of the next fixture until all of the fixtures are connected.
Caution: At the last fixture, the DMX cable has to be terminated with a terminator. Solder a 120
Ω
resistor
between Signal (–) and Signal (+) into a 3-pin XLR plug and plug it into the DMX output of the last fixture.