Microh ARENA COLOUR WASH, Руководство пользователя

Страница: 16 / 27

16
6. Remotely Controllable Functions
6.1. Lamp
The ARENA COLOUR WASH is to be installed with a PHILLIPS MSD 250 lamp.
A relay inside of the ARENA COLOUR WASH allows you to switch on and off the lamp via the Control Panel
on the fixture or through your DMX controller.
6.2. Switching on and off the lamp via the Control Panel
1. Switch on the ARENA COLOUR WASH and wait until the fixture has reset.
2. Press the [Mode] key to access the main menu. Browse through the menu by pressing the [Up] and
[Down] keys until the display shows "LAMP" . Confirm by pressing the [Enter] key.
3. Use the [Up] and [Down] keys to select "On" for switching the lamp on and "Off" for switching the
lamp off and press [Enter] to confirm or [Mode] to cancel.
Note :
It is also important to note that the discharge lamp is a cold re-strike type, which means that it has to
be cold before re-striking. For this reason, you have to wait 5 minutes (max. speed of fan must be
adjusted) after having switched off the lamp before you can switch it back on again. If you try to
switch on the lamp within 5 minutes after having switched it off, the ARENA COLOUR WASH will
store this information and automatically ignite the lamp when the 5 minutes period has expired. The
message "HEAt" will appear on the control panel display on the ARENA COLOUR WASH. If the
lamp attempts to ignite seven times unsuccessfully, "LA.Er" will appear on the display, indicating
that the lamp could be damaged or missing, or that there could be a failure of the lighter or ballast.
6.3. Colour wheel
The ARENA COLOUR WASH features a colour wheel with 7 color positions - 6 of these with dichroic colors
and the last one open. The wheel can be positioned at any point between two adjacent colours. It is also
possible to rotate the colour wheel continuously at different speeds to create the "Rainbow effect“.
6.4. CMY- Colour mixture
The CMY colour mixing system is based on graduated cyan, magenta, and yellow color filters. A continuous
range of colours may be achieved by varying the amount of each filter from 0 to 100%.
6.5. Beam effects
The beam shaper allows you to widen and flatten the beam; it rotates within 180°.
There is a frost-filter on the same wheel as the beam shaper that softens the beam.
6.6. Dimmer
Smooth 0 - 100 % dimming is provided by the dimmer unit.
6.7. Shutter / Strobe
This unit provides strobe effects between 1 and 10 flashes per second.