Microh ARENA COLOUR WASH, Руководство пользователя

Страница: 3 / 27

3
CAUTION!
Keep this fixture away from rain and moisture!
Unplug fixture before opening the housing!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START UP!
1. Safety
1.1. Safety instructions
Everyone involved with the installation, operation and maintenance of this fixture should:
-
be knowledgeable of sophisticated lighting systems
-
follow the instructions in this manual.
CAUTION!
Be careful when operating or installing this fixture.
You could suffer an electrical shock
when touching the wires!
We have made every effort to ensure that this fixture has left our premises in absolutely perfect condition. In order to maintain this
condition and to ensure safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes
outlined in this manual.
Important:
The manufacturer does not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modifications made to this fixture.
Please consider that damages caused by manual modifications to the fixture are not subject to warranty.
Never let the power cord come into contact with other cables! Handle the power cord and all connections with the power supply with
particular care!
Make sure that the power cord is never crimped or damaged by sharp edges. Check the fixture and the power cord occasionally for
wear and damage.
Make sure that the available voltage is not higher than indicated on the rear panel of the fixture. Before connecting the fixture to the
power supply, make sure the power switch is set to the OFF position. The power plug should be accessible after installing the
fixture.
Always disconnect the fixture from the power supply when it is not in use or before cleaning it. Only handle the power cord by the
plug; never pull out the plug by tugging on the power cord.
This fixture falls under protection Class I. Therefore it is essential to connect the green conductor to earth, ensuring that the unit is
prefectly grounded.
Only qualified technicians should perform electrical connections, repairs and servicing of the fixture.
Do not connect the fixture to a dimmer pack.
Do not switch the fixture on and off in short intervals as this will greatly reduce the lamp’s life.
During the initial start up some smoke or odor may arise. This is a normal process and does not necessarily mean that the fixture is
defective.
When replacing lamps and fuses, use the same type and rating only.
Caution: Do not touch the fixture barehanded during its operation, the housing becomes very hot!