microguard RCI 510, Руководство оператора

Страница: 30 / 35

GREER COMPANY GREER COMPANY GREER COMPANY GREER COMPANY
Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE, SANTA ANA, CA 92705 PN W450250 Rev B 08/09/00
RCI 510 RATED CAPACITY INDICATOR OPERATOR'S MANUAL TEL:(714) 259-9702 FAX:(714) 259-7626
30 of 35
OPERATOR OPERATOR OPERATOR OPERATOR SETTABLE ALARMS SETTABLE ALARMS SETTABLE ALARMS SETTABLE ALARMS
CONTINUED CONTINUED CONTINUED CONTINUED
WORK AREA SELECTION MODE
WORK AREA SELECTION MODE WORK AREA SELECTION MODE
WORK AREA SELECTION MODE
This alarm, when set, permits the operator to define an Operating Zone by only two set points. The use of
this method results in a greatly enhanced work area and also clearly and simply defines the Exclusion
Zone area. The following diagram illustrates the Operating Zone and the Exclusion Zone.
The operator defined work area alarm, when set, will define an imaginary vertical plane between two set
points to optimize the working area. When passing the plane, the red warning lamp will illuminate, the
audio alarm will sound, and the message “EXCLUSION ZONE” will flash on the display.
OBSTACL
E
Set Point 1
Set Point 2
Operating Zone
Operator Area Alarm and Operating Zones
Safe
Working
Distance
Obstacle
EXCLUSION ZONE
Operating Zone
Operating Zone
EXCLUSION ZONE
THE OPERATOR DEFINED WORK AREA ALARM IS A WARNING DEVICE. ALL FUNCTIONS REMAIN OPERATIONAL WHEN
ENTERING THE OPERATOR DEFINED EXCLUSION ZONE. “SAFE WORKING DISTANCE” IS THE TIME IT WOULD TAKE AN
OPERATOR TO REACT TO AN ALARM AND FOR THE CRANE MOTION TO BE HALTED BEFORE ENTERING THE EXCLU-
SION ZONE. IT IS THE RESPONSIBILITY OF THE OPERATOR TO SET POINTS THAT ENSURE THAT THE CRANE BOOM,
ATTACHMENT, LOAD, RIGGING, ETC. MAINTAINS A SAFE WORKING DISTANCE FROM THE OBSTACLE. AVOID
POSITIONING THE BOOM, ATTACHMENT, LOAD, RIGGING, ETC. IN THE EXCLUSION ZONE WHEN MOVING TO SET
POINTS 1 AND 2. WHEN SELECTING SET POINTS 1 AND 2, ENSURE THAT THE LOAD WILL MAINTAIN A SAFE DISTANCE
FROM THE OBSTACLE. IF THE CRANE OR OBSTACLE IS MOVED, OR IF A DIFFERENT SIZE LOAD IS LIFTED, THE WORK
AREA ALARM MUST BE RESET.
WARNING
!