Microframe Corporation
9
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 6300XXX8
Count UP / DOWN Timer Detailed Instructions continued…
Display Format
This may be changed freely without disrupting the running time (unless the displayed count rolls over).
•
As Time
Press [MENU] "230" [ENTER].
•
As Interval
Press [MENU] "231" [ENTER].
Press [MENU] "24x" [ENTER], where 'x' is the interval unit selected.
Note: In countdown mode, fractional time is rounded up to the next interval unit, e.g., 1.5 minutes shows
as 2 minutes.
Options
The following options apply to the count UP / DOWN mode.
See "Options Definitions" for more information.
1.3. Reload Time/Interval
1.4. Chime 1 Time/Interval
1.5. Chime 2 Time/Interval
2.3. Display Format
• 2.3.0. As time
• 2.3.1. As Specified Interval
2.4. Interval Unit
3.1. Internal Chime
3.2. External Chime
3.3. Chime Volume
4.1. Smallest Time Unit Displayed (STU)
4.2. Largest Time Unit Displayed (LTU)
4.3. Leading Zero Suppression
4.4. Colon Flash Rate
5.1. On Rollover
5.2. On Zero
5.3. Chime on Zero
6.1. Input 1 Action
6.2. Input 2 Action
6.3. Pushbutton/volt
6.4. N.O./N.C.
6.5. Button Logic
6.6. Button Debounce
6.7. Remote Lockout
Slave Display Options
See the "Slave Display Options" section for more information about using multiple displays.
•
Set slave mode: [MENU] "213" [ENTER].
•
Set display format:
As time: [MENU] "230" [ENTER].
As interval: [MENU] "231" [ENTER].
•
Set interval unit displayed:
Press [ME
NU] “24x” [ENTER], where “x” is the interval unit selected
•
Set time units displayed:
STU hours: [MENU] “411” [ENTER].
LTU hours: [MENU] "423" [ENTER].
