Microframe Corporation
4
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 6300XXX8
1. Display
2. Remote Control with two AAA batteries
3. Two Brass Push Buttons
with 40’ of wire
4. Power Adapter with 20’ of wire with spade lugs
5. Installation and Specification Guide
6. Screwdriver
Step 1: Screw-down Terminals
All wire connections to Microframe displays are made with screw-down terminals located on the back of
the display.
Step 2: Connecting Power
•
To connect power to the "24VAC” terminal on the display, first loosen the terminal's two screws.
Then push one of the stripped ends of the power adapter wire into each opening in the side of the
terminal. Tighten each screw onto each wire. Check that each wire is secure in each terminal by
lightly pulling on it.
•
To connect the power adapter wire to the wall mounted transformer, first loosen the screw-down
terminals on the power adapter. Next, slide one spade connector under each terminal and tighten
each screw onto the spade connectors.
Getting Started
Parts List
