Microframe Corporation
8
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 6300XXX8
Set Display to Timer Mode
Count UP Timer: Using the remote control, press [MENU] "211" [ENTER]. The display is now in Count UP
Timer mode.
Count DOWN Timer: Using the remote control, press [MENU] "212" [ENTER]. The display is now in Count
DOWN Timer mode.
Operation
To control the timer with the remote control:
•
Count UP Mode
[Up] button to Start / Stop count up
[Down] button to temporarily countdown
[Clear] button to reset to '0'
•
Count DOWN Mode
[Down] button to Start / Stop countdown
[Up] button to temporarily count up
[Clear] button to reload default time
To control the timer with the push buttons, you must first change the default function of the push buttons.
See options 6.1 and 6.2 in the Options Definitions.
•
Count UP Mode
[Input 1] push button to Start / Stop count up
[Input 2] push button to reset to ‘0’
•
Count DOWN Mode
[Input 1] push button to Start / Stop count down
[Input 2] push button to reload default time
Set the Time
Using the remote control, type in the new time and press [ENTER]. If days are not desired, press
[ENTER] again. If days are desired, type in the days and press [ENTER]. If the display is running, it will
continue to count up or down.
Set the Reload Time
Using the remote control, press [MENU] "13" [ENTER]. Type in the desired time and press [ENTER].
Set the Chime Time
The display can chime at two chime times, denoted as Chime Times 1 and 2. In addition, the display can
chime on zero. If the display format is set to "Interval," then this number entry will be by the Interval Unit
"2.4" instead of time format.
•
Chime Time 1
Using the remote control, press [MENU]
“14” [ENTER]. Type in the desired chime time. You may
optionally specify a specific day to chime on, or leave it blank to chime every day. Press [ENTER]
to accept changes.
•
Chime Time 2
Using the remote control, press [MENU]
“15” [ENTER]. Follow the same steps as for chime 1.
Count UP / DOWN Timer Detailed Instructions
This is used to time an event, and can show the time to 1/100th of a
second.