21
MicroEngine
®
XP-GT/GTR Programming Manual
v4.00
The Time Set above defines the time interval that the lock will be released. Please refer
to the Time Set programming procedure that follows after
EXAMPLE 2
.
EXAMPLE 2:-
During normal office hours, users only need to use their cards to access the store room
door. After office hours, all staffs are required to use ‘Card+PIN’ to access the door.
Normal Office Hours
: 08:30 to 17:30
Lunch Hour
: 12:00 to 13:00
i.e. The time intervals for the door to operate in ‘Card+PIN’ Mode is as follow:
➢
00:00 to 08:29
➢
12:01 to 12:59
➢
17:31 to 23:59
The Time Set will be programmed as follows:
Time Set 03 From To
Interval 1
00:00 08:29
Interval 2
12:01 12:59
Interval 3
17:31 05:59
Here, the timestamp interval is different from the one indicated in
EXAMPLE 1
. Users
thus need to create 2 different Time Sets to fulfil both examples.
Time Set defines the time intervals to activate the designated functions. As indicated
above, all three intervals in this Time Set have to be defined to activate the ‘Card+PIN’
function.
To program the time set, please follow steps below:
1. Enter Configuration Menu.
2. Press
1
for
System Menu
.
3. Press
3
for
Time Set
. Screen as below will be shown:
Time Set Setting
Enter Time Set Number
(Min = 02, Max = 49)
[00]
√
- OK
X - Cancel
