15
MicroEngine
®
XP-GT/GTR Programming Manual
v4.00
NOTE:-
If controller has established communication with the software, the date
& time will automatically be synchronized with the PC’s date & time.
1.2 Door Parameter
This menu allows users to edit general door operation settings for the controller.
To program the door parameter setting, please follow steps below:
1. Enter Configuration Menu.
2. Press
1
for
System Menu
.
3. Press
2
for
Door Parameter
.
4. Press
↑
or
↓
to navigate the pointer to the desired parameter.
5. Press
√
to edit the settings, followed by the desired setting values and
√
again to save changes.
6. The screen below is shown, with the list of parameters available to program.
Door Parameter
▸
Lock Release Time 10
Door Open Time
15
Lock Release TZ
00
Exit Button TZ
01
√
- OK
X - Cancel
7. Press
X
if users wish to return to
System Menu
.
8. Screen as below will be shown. Press
√
to save changes.
Door Parameter
Save Changes?
√
- OK
X – Cancel
Set Date & Time
Save Changes?
√
- OK
X - Cancel
