System Configuration
98
situation is not allowed to the security device. So the system needs to check itself and to get itself back to the operable
state when a problem occurred.
Auto reboot are functions for the system reliability.
Figure 5.16. Auto Reboot Configuration Screen
Auto Reboot
The configuration of the auto reboot is as follows.
Figure 5.17. Enable Auto Reboot Screen
•
Reboot Interval
•
The next reboot date is decided by add the current date to the reboot interval(days), and the next reboot time is Reboot
Time. The system will be rebooted in the next period when the time is over by disabling Auto Reboot or canceling it.
•
The system indicates not the hardware, but the NVR software.
Performance of the system will be deteriorated or the system will not be worked in case the system becomes unstable by
the operating system or the software problem. Increasing these unstableness can raise a critical problem in the security
system. Auto Reboot makes the system reboot after certain amount of time is passed to make up this problem.
•
Note
•
The time when the administrator exists or the fluctuation of monitoring target is few is suitable to the auto
reboot time.
