Basic Configuration
39
added to the list.
The selected network camera will be removed from the list by clicking Delete button.
The order of the added camera in the list can be changed by clicking arrow button besides Delete button.
All of the changed configurations will be applied by clicking Ok button. All of the changed configurations will be
ignored by clicking Cancel button.
•
Model
•
The model of network camera to be connected should be selected here. The configurable attributes are varied
according to the selected network camera. Supported IP cameras are described in the section called “Supported IP
Cameras”.
•
Address
•
The address of network camera IP should be entered. All of the path without port number are needed when the model
is a RTSP IP Camera.
•
Port
•
The port number for network camera to be connected should be entered. If the configuration of network camera is not
changed, the port number is configured with default value according to the model of the network camera.
•
RTSP Port
•
Set up the RTSP port for network camera. If you use the RTSP port number entered by the user, enable the check box.
Then enter the RTSP port number. If you use the RTSP port number of network camera, disable the check box.
•
Audio Port
•
Set up the audio port for network camera. If you use the audio port number entered by the user, enable the check box.
Then enter the audio port number. If you use the audio port number of network camera, disable the check box.
•
Event Port
•
Set up the event port for network camera. If you use the event port number entered by the user, enable the check box.
Then enter the event port number. If you use the event port number of network camera, disable the check box.
•
User
•
The user id is necessary to access the network camera. Detail information is available in the instruction manual of the
network camera manufacturer.
•
Password
•
The password is necessary to access the network camera. Detail information is available in the instruction manual of
the network camera manufacturer.
•
Use Public Address
•
The public IP address is used instead of the private IP address for the camera which is connected through private IP
environment. Enabled option should be selected to use this function. Disabled option should be selected not to use it.
This item is enabled when the type of the network camera is ONVIF IP camera or UDP Technology IP camera.
•
Resolution
•
The resolution of the network camera video can be selected here. This selection is only available on the supported
model.
•
Transport
•
Data transportation manner of the RTSP network camera is selected. RTP over RTSP/TCP, RTP over UDP,
RTP/RTSP over HTTP/TCP are currently available. Supported manner from the camera should be selected.
•
Profile
•
The profile of the network camera video can be selected here. This selection is only available on the supported model.
•
Keep Alive
•
This item is for keeping alive on RTSP/ONVIF IP camera. Enabled option should be selected to use this function.
Disabled option should be selected not to use it.
•
Check Connection & Inputs
•
This button updates the information of sensor, relay, status after the first connection with the network camera by
entering model, address, port, user, password, resolution. A new network camera can be registered when this job is
finished successfully.
•
Sensor
•
The mapping for sensor of the network camera is only available on the supported model.
