LLDP
LLDP – View Neighbor Information
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
77
12.2
LLDP – View Neighbor Information
This Page provides a status overview for all LLDP neighbors. The displayed table contains a row for
each interface on which an LLDP neighbor is detected.
Figure 12-2: LLDP Neighbor
•
Local Interface
- The interface on which the LLDP frame was received.
•
Chassis ID
- The identification of the neighbors LLDP frames.
•
Port ID
- The identification of the neighbor port.
•
Port Description
- The port description advertised by the neighbor unit.
•
System Name
- The name advertised by the neighbor unit.
•
System Capabilities
- Describes the neighbor units capabilities. Enabled capability is followed
by (+) and disabled capability is followed by (-). The possible capabilities are:
o
Other
o
Repeater
o
Bridge
o
WLAN Access Point
o
Router
o
Telephone
o
DOCSIS cable device
o
Station only
o
Reserved
•
Management Address
- The neighbor units address that is used for higher layer entities to
assist discovery by the network management. This could for instance hold the neighbors IP
address.