SNMP
SNMP- Enable SNMP
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
55
9
SNMP
9.1
SNMP- Enable SNMP
This page is responsible for enabling/disabling SNMP in general - SNMPv1, SNMPv2 and SNMPv3 and
also configure several SNMP MIB-II System-Information OiD
Figure 9-1: Enable SNMP
Enable SNMP
– Enable/Disable SNMP in general (SNMP1, SNMPv2, SNMPv3).
System Contact
– Textual identification of the contact person for this managed node. String length is 0
to 255, and valid ASCII characters range from 32 to 126.
System Name
- An administratively assigned name for this managed node. By convention, this is the
nodes fully-qualified domain name. A domain name is a text string drawn from the alphabet (A-Z,a-z),
digits (0-9), minus sign (-). No space characters are permitted as part of a name. The first character
must be an alpha character. And the first or last character must not be a minus sign. The allowed string
length is 0 to 255.
System Location
- The physical location of this unit. The allowed string length is 0 to 255, and the
allowed content is the ASCII characters from 32 to 126.
NOTES:
1. Detailed SNMP configuration example can be found at the end of the SNMP section.
2. SNMP is disabled by default for security concerns. In case SNMPv2 is used, please change SNMPv2
default public, private community strings (passwords) prior enabling SNMPv2.
NOTES:
1. The System Name field is also used as unit Hostname for CLI/Telnet/SSH interface.
2. The System Name field is also used by DHCP whenever the hostname within VLAN DHCP
configuration field is left blank.