PoE-BT Power
PoE-BT - Set PoE-BT Power
Microsemi PDS-408G Web Management User Guide Ver. 1.0.1, 03-2019
46
7.2
PoE-BT - Set PoE-BT Power
All PoE configuration, both global and per port is carried out from this page.
Figure 7-1: PoE-BT configuration
7.2.1
Global Configuration
Extended Power Mode
– When checked, any PD device on any one of the ports may consume slightly
extra power beyond class maximum power (for example, 93W instead of 90W). Whenever PoE PD
device tries to consume power beyond its class max power, it will be shut down by the unit.
Uninterruptable Power
– When checked (checked by default), the Switch is prevented from
performing a PoE power down and up cycle as part of the Switch’s startup process. This is applicable
only whenever the Switch is performing software reset, meaning uninterruptable AC power during the
entire software reset cycle.
7.2.2
Global Configuration
Figure 7-2: PoE Port Configuration
Port
– Switch port number. Only PoE capable ports are listed (ports 9-11 are none PoE).
Enable
– Enable/Disable POE power. Please note that the Ethernet port will remain active even when
PoE port is disabled.
PoE Mode
•
802.3BT:
Powers only PoE-BT/PoE-AT/PoE-AF compliant PD (powered device) devices.