behave as Find Me Locator (GAP Central) and Battery Service Application (GAP Peripheral) simultaneously
with eight active connections. Continuous data transfer happens on all the links by the ATBTLC1000-MR/ZR
and even if one link gets disconnected, the data transfer happens on the other links.
5.3.19
L2CAP Throughput Application
This demonstration requires two ATBTLC1000-MR/ZR devices. Program one ATBTLC1000-MR/ZR device with the
L2CAP Peripheral and another one with the L2CAP Central application example. Perform the following steps to run
the Throughput application demo:
1.
Follow the steps (1 and 2) from
for both devices.
2.
The device initializes and start-up.
3.
The Central device starts scanning and subsequently connects with the desired peripheral device. The
following log shows that both devices connected to confirm the connection status.
Figure 5-54. L2CAP Central Connection with L2CAP Peripheral
Figure 5-55. L2CAP Peripheral Connection with a L2CAP Central
4.
Once the connection is established, the peripheral device keeps sending the specified data and the central
device receives the same data in a given time. Eventually, calculated Throughput is displayed on the console
for both central and peripheral.
ATBTLC1000
Application Demo
©
2019 Microchip Technology Inc.
User Guide
DS50002640B-page 57