3.
Click the
Scan Parameters
service. The user receives a notification for the scan refresh characteristic value.
The user can disable the notification in the Scan Parameters page, refer the following figure.
Figure 5-19. Scan Refresh Characteristic Notification Options
4.
The user can set appropriate value for the Scan Interval and Scan Window characteristics.
5.
The newly updated values of Scan Interval and Scan Window must be displayed on the console log of the
device side as shown in the following figure.
Figure 5-20. Updated Scan Interval/Window Characteristic Value on Device
5.3.6
Time Information Profile Application
Perform the following steps to run the Time Information Profile application demo:
1.
Follow steps 1 through 4 from the
2.
Press the SW0 button on the device to read the internally supported characteristic values from the iPhone.
3.
The console log on the device side displays the values for all characteristics supported by the iPhone
internally.
Figure 5-21. Console Display – Date, Time, and Day Information
ATBTLC1000
Application Demo
©
2019 Microchip Technology Inc.
User Guide
DS50002640B-page 41