– For HIGH ALERT, set high alert RSSI to -91dBm and above, alert status is indicated by LED, which must
be ON.
– For MILD ALERT, set RSSI to -70dBm to -90dBm, alert status is indicated by LED, which must be
toggling.
– For NO ALERT, set RSSI to -69dBm and below, alert status is indicated by LED, which must be OFF.
If the reporter device moves out of the proximity of the monitor device, the path loss crosses the threshold
values and the corresponding alert value is set; the alert notification is displayed on the console as shown
below.
Figure 5-14. Proximity Monitor Setting Alert Levels
5.3.4
ANCS Application
Perform the following steps to run the ANCS application demo:
1.
.
2.
Enable Bluetooth from the Settings page of iPhone. The phone starts to scan for the devices. ATMEL-ANCS
appears among the list of devices scanned. Click the
ATMEL-ANCS
to connect to the device.
Figure 5-15. ANCS Device Discovery in iPhone
3.
When connected, the client side initiates a pairing request with the iPhone. The console log provides guidance
for the user to enter the pass-key on the iPhone.
ATBTLC1000
Application Demo
©
2019 Microchip Technology Inc.
User Guide
DS50002640B-page 39