Figure 5-40. Displaying Heart Rate Measurements
4.
When the user disable on Stop Notify, the notifications are displayed in the console logs as:
Notification Disabled
5.
During the connection, the SW0 button is used to disconnect the connection. If no connection exists, the SW0
button is used to start advertisement.
5.3.14
Blood Pressure Profile Application
Perform the following steps to run the Blood Pressure Profile application demo:
1.
Establish the connection between the device and mobile phone using the procedure listed in
.
2.
When the device is connected, the application displays Blood Pressure, Device Information Service and
Generic Information.
3.
On entering the Blood Pressure service page, the mobile application enables the notifications and indications
for interim cuff pressure and blood pressure characteristics, respectively. The blood pressure sensor device
simulated by the device, sends the current blood pressure values after receiving the indications enabling
request. The corresponding console logs and mobile application screen are shown in the following screen.
Figure 5-41. Console Log for Blood Pressure Measurements
ATBTLC1000
Application Demo
©
2019 Microchip Technology Inc.
User Guide
DS50002640B-page 50