33
BATTERY SETUP SETTINGS
CUT-OFF
XX.XV
FORCE BAT INTO
X
BATTERY MENU
Exit And Save
LAY-UPS
100%
BATTERY MENU
Restore Factory
BATTERY MENU
Exit, Do Not Save
LAY-UPS
100%
SAVING DATA
PLEASE WAIT
10.9 Battery Low Voltage Shut Down
To change the
BATTERY LOW OFF AT
settings, Press
This selects at what
BATTERY LOW VOLTAGE
the inverter will shut down
“Also known as: low battery voltage cut-out”
This function prevents the inverter from draining the batteries completely.
When the DC voltage drops below a specified level, the inverter will stop functioning.
The system display will give a Low Battery Voltage message or Low Battery Voltage error.
Th
is function is intended to protect both the batteries and the inverter’s output.
This voltage is adjustable as below.
By Pressing ENTER you can select to change the Battery Low OFF At voltage.
Table 10-4: Battery Setup
Table 10-5; Battery Setup
Lead Acid
Battery Low Voltage Shutdown
Lithium-Ion
Battery Low Voltage Shutdown
48 V System
42
44
46
Default
– Lead Acid
47
48
–
To change the Menu press
, the menu changes to Force Bat Into
10.10 Force Charge
To change the
FORCAE BAT INTO
settings, Press
It is possible to
FORCE
the charger to go into another charge mode on a temporary basis.
If the charger is in
FLOAT
but you require it to go back into
BOOST
then the next menu will allow
this.
Pressing
allows the charge to be changed from,
Auto Charge
to
Boost
or
Float
.
Pressing
will give you 3 options to
SAVE
the changed data.
This will give you the options of saving the changes that have been made. Press
at the correct
SAVE
menu.
OR
OR
If the changes to the settings need to be
saved
Press
ENTER,
When the enter button is pressed then the inverter will show:
If no entry is made for 1 minute the display will return to the main menu and the back light will turn off
48V System
46.4
47.6
48.4
49.2
Default
– Lithium
50.8
